S-1326 Swivel Hook

A swivel hook lets the load turn without winding up the sling. Note which kind you need: a plain swivel is for positioning an unloaded hook, while a bearing swivel turns under load.

The S-1326 is the plain swivel hook: for positioning, not for rotating under load.

Features

• The S‑1326 is a positioning device and is not intended to rotate under load. For a swivel hook designed to rotate under load, use the S‑13326.
• Rated for both wire rope and for use with Grade 80/100 chain.
• Forged alloy steel, Quenched & Tempered.
• Individually proof tested at 2‑1/2 times the chain Working Load Limit, with certification.
• Recessed trigger design is flush with the hook body, protecting the trigger from potential damage.
• Easy to operate with enlarged thumb access.
• Positive lock latch is self‑locking when the hook is loaded.
• Trigger repair kit available (S‑4316). Consists of spring, roll pin and trigger.
• Fatigue rated to 20,000 cycles at 1‑1/2 times the Working Load Limit.
• The SHUR‑LOC® hook, if properly installed and locked, can be used for personnel lifting applications and meets the intent of OSHA Rule 1926.1431(g)(1)(i)(A) and 1926.1501(g)(4)(iv)(B).
• A G‑414 heavy thimble should be used with wire rope slings.